Process monitoring and/or power measurement in one device
This is what the plasmo processobserver advanced can do:
- Two independent channels for process monitoring and/or power measurement in one device
- Automatic process monitoring system integrated in the production process
- Defects are detected in real-time; the analysis is non-contact and non-destructive
- Documentation and storage of the measurement data according to ISO 9001/2
- The statistical long-term evaluation of the data is an effective means for process optimization
- Online process monitoring during the laser material processing (welding, cutting, drilling, soldering)
- Defects not visible to the naked eye can be detected
Functioning principle of the plasmo processobserver advanced
The process light is transmitted to a RISC processor (Power PC) by means of an optical fiber via an optical adapter, a fiber mounting or an integrated fiber in a machining head. The digitized and conditioned signal is analyzed and evaluated by the RISC processor. The result is indicated in real-time at the end of the weld by an IO/NIO-evaluation (IO = In Order; NIO = Not In Order) on the front display and at one of the digital PLC outputs. In addition, the recorded signal data are forwarded to a higher-level workstation for visualization over the RS232 or Ethernet interface. For the workstation there are parameterization tools available as well as visualization software (online/offline). Besides a statistics module for short-term and long-term evaluation, there are other helpful software tools available.
Detailed information - Download Data sheet plasmo processobserver advanced
| < Prev | Next > |
|---|